RF Remote Control Receivers
Nortech offers single, dual and 4 channel receivers (can therefore control up to 4 devices). Each receiver can learn and memorise up to 10 unique transmitter codes per channel.
Each receiver model provides a range of control modes from the following:
- Impulse & Timer – Pressing the transmitter sends a short output pulse.
- On/Off toggle – Pressing the transmitter turns the output on, then pressing again turns it off.
- On/Off – One code turns the output on and another code turns the output off.
- Dead Mans control – Pressing and holding the transmitter turns the output on. When the transmitter is released, the output turns off.
- Awning – Pressing the transmitter turns the output on, then pressing again turns it off. A third press turns another output on and a forth turns it off. A typical application would be roller shutter doors.
Key Features
- Learn and memorise transmitter codes
- Up to 4 channels per receiver
- Up to 10 transmitter codes per channel
- Voltage free output relay contacts
- Range of output control options
| Model | Outdoor Use | Channels | Transmitter Codes/ Channel | Switching | Operating Modes | |
| Mains | Low Voltage | |||||
| RCU01 | Y | 2 OR 4 | 4 | Y | Y | ON/OFF Pulse Timer Continuous Awning |
| RCL03 | N | 1 OR 2 | 10 | N | Y | ON/OFF Pulse Continuous |
| RCL04 | Y | 1 OR 2 | 10 | N | Y | ON/OFF Pulse Continuous |
| RC-PP | N | 1 | 10 | Y | N | ON/OFF |
Nortech's RF Remote Control range also includes:
- Single, two and four channel transmitters
- Wiegand Converter for integration into access control systems
- Wireless Keypad
- 4 Channel OEM transmitter
- RC100 combined receiver/access controller
- Remote Control Power Plug